Whatever you need,
we have you covered.
Installation, Service & Repairs
All our work is carried out to the highest standard.
If you're not happy, we aren't happy!
System Servicing
It's important to have your system serviced annually in both domestic & commercial premises.
A service is not just for warranty purposes - regular servicing ensures that your system is working efficiently. Key components like filters and coils need to be cleaned for efficient air flow, and deteriorated pipe insulation could cause problems or even complete system failure without intervention. Identifying any potential faults that may be developing as early as possible is an important aspect to a good service.
System Fault Finding and Repair.
If your system is not working as it used to or working correctly, you may have an underlying issue.
From fault to fixed - we have you covered.
System Diagnosis & Testing
Utility Room Air Conditioning
Here we installed a 3.5kW system into our customers utility room to regulate the temperature to keep their dog cool in the summer and warm in the winter. With the added advantage to be able to use it as a dehumidifier to dry laundry.
Multi Split Systems
A multi split system is a fantastic option if you have limited outdoor space for external units, but would like both heating and cooling capability in multiple rooms.
Single Split System
2.5kw & 3.5kw
In this domestic property, we were installing multiple individual systems in different areas of the property.
Each system can be independently controlled from each other, ensuring that you can stay cool in the summer and keep warm in the winter wherever you are in your home.
We always aim to take the customers needs into consideration, but always ensure that we are installing any system to regulations.
Semi Commercial Office
6.5kw Single Split
Here we installed a 6.5kw single split in the office. The customer requested that the external unit was installed up high so not to obstruct the rear access.
An external unit requires a 1 metre clearance in front of the unit to ensure it works correctly. 3 metres of pipework is the required minimum between the internal and external unit, so we concealed this behind the external unit.
Garden Room
3.5kw Single Split
We can install new electrical circuits to feed the system. Here we hid the pipework behind the cladding by removing a couple of planks and reinstating them afterwards.
Not only can the system be used to heat or cool the room but can also be used as a dehumidifier.
Domestic
2.5kw Single Split
We were asked to install this system into a customers bedroom.
We had to maintain a 3 metre minimum on the pipework so we looped it behind the external unit.
We also installed the electrical supply.
